email:           Tel: 01442 381657           Mob: 07989 546176 or 07880 867122

Barclay Fencing Contractors
Part of the Hemel Fencing Group

Automated Cantilever Sliding Gates - Cantilever Sliding Gates

Cantilever Sliding Gates
Cantilever Sliding Gates can be powered by an electric three phase motor, which opens and closes without supervision.

The automated cantilever sliding gates can be controlled using various access control systems i.e. card swipes, remote control key fobs, ground loops, coded key pads, intercom systems, camera intercom systems, iris readers and finger print readers.

The gate opens to allow entry and closes automatically after a pre-set time (e.g. 20 seconds). For safety reasons all automated gates must have safety edges on both the gate leaf end and on the fate support post. An infra-red beam is also required for additional pedestrian and vehicle protection.

If at any time during the closing of the gate either the infra-red beam of the safety edges sense an obstruction in the gateway, the gate will stop and re-open, and after a pre-set time re-close.

Can also be manual.
 © Copyright Hemel Fencing, Hertfordshire Hosting - Caultex Technology Ltd For Expert Advice Call 01442 381657 

Security Fencing Hertfordshire

Weld mesh Fencing in Buckinghamshire

Commercial fencing in Surrey

Site Hoarding in London

Metal Railings in Bedfordshire

Steel Palisade Fencing Berkshire

Sports Pitch Fencing Middlesex

Security Fencing Essex